Novel synthesis of heterocycles having a functionalized carbon center via nickel-mediated carboxylation: total synthesis of erythrocarine

Novel synthetic procedure of heterocycles was developed using nickel-mediated alkylative carboxylation, and the total synthesis of erythrocarine was achieved using this method and RCM of dienyne as the key steps. [reaction: see text]     

Changeable reactivity of ketyl radicals derived from 2-bromomethyl-2-(3-butenyl)benzocyclic-1-alkanones depending on electron transfer conditions employed

Photoinduced electron transfer reaction of 2-bromomethyl-2-(3-butenyl)benzocyclic-1-alkanones with amines afforded 5-exo radical cyclization products while electron transfer reaction with samarium diiodide produced cyclopropanols.     

Requirement for radiation shields of transportation pipe for on line inhalation gases from compact cyclotron in positron emission tomography

In the unit housing of a compact cyclotron and positron emission CT (PET), positron emitting gas such as 15O, 11C, C15O2, C15O etc. is supplied from a cyclotron to a PET room through a transportation pipe with an appropriate shield to reduce positron annihilation radiation. Using lead or concrete shield blocks with various thicknesses, radiation leakage through the shield was measured by an ionization chamber type survey meter during continuous and constant supply of 15O gas of 1.85 GBq/min concentration which is the maximum dose for clinical use. The leakage radiation measured was 213.7, 56.0, 15.3, 5.0 muSv/week for lead shield with 1, 2, 3, and 4 cm thickness, respectively, and 193.3, 30.5 and 5.1 muSv/week for concrete shields with thickness of 10, 20, and 30 cm, respectively. The present study shows that to keep less than 300 muSv/week, which is the permissible dose rate of the boundary zone around the radiation controlled area by Japan Science and Technology Agency, it is required to use more than 8 mm thick lead shield or 7 cm thick concrete for continuous supply of 1.85 GBq/min 15O gas.     

Optical sensor for carbon dioxide combining colorimetric change of a pH indicator and a reference luminescent dye

A new optical CO₂ sensor based on the luminescence intensity change of the europium(III) complex tris(thenoyltrifluoroacetonato) europium(III) dihydrate ([Eu(tta)₃]) caused by the absorption change of various pH indicators—thymol blue, phenol red, or cresol red—with CO₂ was developed and its CO₂ sensing properties were investigated. For all the CO₂ sensors using pH indicators the observed luminescence intensity from [Eu(tta)₃] at 613 nm increased with increasing CO₂ concentration. The linear calibration method based on the plot of (I₁₀₀–I₀)/(I–I₀) versus the inverse of CO₂ concentration was suggested, where I₀ and I₁₀₀ were luminescence intensities at 613 nm of the CO₂ sensor film in 100% nitrogen and 100% gaseous CO₂. In all cases the plots showed good linearity and the correlation factors of the plots, r², were 0.991 for thymol blue, 0.990 for phenol red, and 0.998 for cresol red. The slopes of the plots (A/B) for thymol blue, phenol red, and cresol red were 2.2, 5.2, and 9.0%, respectively. The response times of the CO₂ sensor film were 4.0 s for thymol blue, 4.4 s for phenol red, and 8.8 s for cresol red for switching from nitrogen to CO₂, and the recovery times of films were 36 s for thymol blue, 39.2 s for phenol red, and 56.6 s for cresol red for switching from CO₂ to nitrogen. The signal changes were fully reversible and hysteresis was not observed during the measurements. The highly sensitive CO₂ sensor was developed using thymol blue as an indicator for the CO₂-sensing probe.     

Remarkable reactivity enhancement with Sb?N inter-coordination of ethynyl-1,5-azastibocines in Pd-catalyzed cross-coupling reactions with organic halides

The reaction of 12-arylethynyl-6-methyl-5,6,7,12-tetrahydrodibenzo[c,f][1,5]-azastibocines with organic halides such as acyl halides and aryl halides in the presence of PdCl₂(PPh₃)₂ as a catalyst led to the formation of cross-coupling products, alkynyl ketones and diaryl acetylenes, in good yields. The reactivity of the ethynyl group on the 1,5-azastibocines was far superior to that on diphenyl(phenylethynyl)stibane, which brought about marked improvement in the reaction conditions (lower temperature and shorter reaction time) and in the yields of the cross-coupling products. Single-crystal X-ray analysis of the ethynyl-1,5-azastibocine showed the presence of intramolecular Sb?N interaction which should be responsible for the remarkable reactivity enhancement of the 1,5-azastibocines for this type of reaction.     

A new synthetic pathway of segmented tri-block copolyether

A new synthetic pathway of A–B–A tri-block copolyether which is composed of a hydrophilic poly(oxyethylene) unit as an A part and a hydrophobic poly(oxy-2-methyl-trimethylene) unit as a B part is proposed. Telechelic α-tosyl-ω-tosyloxypoly(oxy-2-methyl-trimethylene) derived from tosylation of poly(oxy-2-methyl-trimethylene glycol) (PMTG) was allowed to react with poly(ethylene glycol) (PEG) in the presence of sodium hydroxide. T_g of the resulting A–B–A tri-block copolyether (PEMG) (M?_n = 1600) was ?72°C and its specific gravity [D₄¹⁵] was 1.055.     

Synthesis of optically active 2-ethyl-1,6-dioxaspiro[4.4]nonane (chalcogran), the principal aggregation pheromone of pityogenes chalcographus (l.)1

((2R, 5RS)- and (2S, 5RS)-2-Ethyl-1,6-dioxaspiro[4.4]nonanes (chalcograns) were synthesized in a simple manner by applying the recent technique of dianion chemistry.     

Effects of added metal ions on the interaction between polyvinylpyrrolidone and azo dyes carrying hydroxyl groups

The extent of binding of chrome violet, which is a monoazo dye and involves two hydroxyl groups in o and o′ positions to azo group, by polyvinylpyrrolidone is markedly enhanced in the presence of Co²⁺ ion. The amount of binding in the presence of 1 × 10^?4 mol/L of Co²⁺ ion increases by a factor of about 10 compared to that in the absence of the metal ion. Ni²⁺ and Zn²⁺ ions do not perceptively influence the binding affinity of the dye. Cu²⁺ ion, in contrast, suppresses the binding. To investigate further the action of added metal ions, a cobalt–complex dye was prepared and its binding property for the polymer was compared to that of chrome violet in the presence of metal ions. Some possible mechanisms for the enhancement of chrome violet binding by the addition of Co²⁺ ion are described.     

Synthesis of a new donor, BEDT-HBDST and crystal structures, electrical and magnetic properties of (BEDT-HBDST)2MX4 (M=Fe, Ga, X=Cl, Br), where BEDT-HBDST=2,5-bis(4,5-ethylenedithio-1,3-diselenol-2-ylidene)-2,3,4,5-tetrahydrothiophene

A novel conjugation-elongated bis(ethylenedithio)tetraselenafulvalene (BETS) type donor, 2,5-bis(4,5-ethylenedithio-1,3-diselenol-2-ylidene)-2,3,4,5-tetrahydrothiophene (BEDT-HBDST) and its magnetic and non-magnetic anion salts, (BEDT-HBDST)₂MX₄ (MX₄⁻=FeCl₄⁻, GaCl₄⁻, FeBr₄⁻ and GaBr₄⁻), were prepared. These four salts are isostructural and belong to the space group of P2/c. They showed semiconducting behavior with small activation energies (59-64 meV). The band structures of these salts are quasi one-dimensional and there is a midgap between the upper band and the lower band, since the degree of dimerization is significant in the stacking direction. The MX₄⁻ ions are located between the donor columns and near to the ethylenedithio moieties of the donor molecules. The magnetic susceptibilities of the FeCl₄⁻ and FeBr₄⁻ salts follow the Curie-Weiss law with Curie constants of 4.6 and 4.8 emu K mol⁻¹ (sum of the spins of S=5/2 and S=1/2) and negative Weiss temperatures of θ=−1.2 and −4.9 K, respectively, revealing a weak antiferromagnetic interaction of 3d spins of the FeCl₄⁻ and FeBr₄⁻ anions. The Fe?Fe (6.66-7.60 Å), Cl?Cl (4.81-4.82 Å) and Br?Br (4.74-4.77 Å) distances in the crystal structures of these salts are significantly long. Therefore, the direct magnetic interaction between the 3d spins of the nearest neighboring Fe³⁺ ions appears to be not readily accessible.     

Simple and sensitive determination of methylglyoxal in biological samples by gas chromatography with electron-capture detection

Methylglyoxal was allowed to react with 4,5-dichloro-1,2-phenylenediamine, and the 6,7-dichloro-2-methylquinoxaline formed was determined by gas chromatography with electron-capture detection. The standard curve of the quinoxaline was linear up to 160 pmol/ml. The recoveries of methylglyoxal from coffee and rat liver homogenate were 84.1 and 77.6%, respectively. This procedure was very selective and so sensitive that as little as 9 fmol of the quinoxaline could be measured in biological and food samples.